Unverferth 1319
Features
Enhanced Line-Of-Sight!
- Exclusive, forward-reaching, front-folding corner-auger increases the upper auger length for enhanced auger reach and height
- This innovative design allows the operator to easily view the auger and downspout from the side window of the tractor cab, reducing fatigue and minimizing the risk of spilling
- Unloading accuracy is optimized when the downspout is pointed straight down and the 19-Series XTREME grain cart provides up to 10 feet of auger side reach when in this position which reduces the risk of throwing grain off target
- The upper auger folds within the width of the tank for safer road transport and features a field-rest stand for quick and convenient operation into the unload position
Increased Unloading Speed
- The patent-pending auger design features a U-Joint transition that angles the upper auger upward and outward for increased side-reach and height
- 21" diameter auger in the sump transitions into a 20" auger for increased unloading efficiency and unloading speeds up to 650 bushels per minute
- Exclusive, single-point auger connection ensures the upper and lower augers are aligned and the patent-pending flighting wings provide a continuous flow of flighting for a smooth and efficient transfer of grain between the upper and lower auger
- Electronic balancing of the upper and lower auger sections virtually eliminates vibration for long-term life
- Exclusive, 7/16" thick extended-wear flighting with double flighting sections in the auger sump provide increased unloading efficiency and added durability for trouble-free operation
4-Way Downspout
- 4-Way directional downspout provides nearly 4 feet of in-and-out and 4 feet of side-to-side control with minimal change in the discharge height for easily topping off trucks with limited tractor movement
- 10 feet of auger side reach with the downspout pointed straight down minimizing the chance of throwing grain off target while unloading
- The hydraulically driven gear motor on the downspout provides a smooth and responsive feel when adjusting from side-to-side
More Standard Features
- Field rest bracket for the upper auger shortens the amount of time required to fold and unfold the auger when operating in-field
- Dual spout-mounted LED unloading lights permit easy night time operation
- The patented soft-start mechanism and auger timing ensure a smooth engagement for maximum grain flow and reduced driveline stress
- The cushioned auger fold cylinder gently folds and unfolds the upper auger into the loading and transport position
- When in the unload position, the hydraulic locking mechanism holds the upper and lower augers tightly together for a leak-free seal
Tank Construction
- Models 1319, 1119 and 1019 feature tank capacities of 1,330, 1,100 and 1,000 bushels to meet individual preferences
- Tank features an exclusive deep sump design, which funnels grain down into the auger for fast and complete unloading
- Industry-leading 40 degree front and 30 degree rear tank slopes and a graphite coated interior ensures complete cleanout and faster unloading speeds, regardless of grain moisture
- Hydraulically operated 36" flow gate features a highly visible position indicator for easily controlling grain flow while unloading
- Exclusive manufacturing process crimps side panels for added strength and exposed seams are silicone sealed for corrosion resistance
- Durable, high-grade enamel paint is baked on in tractor red or green for a long-lasting and smooth, automotive-like finish
- Conveniently located wheel-operated gravity unloading door located on the auger sump permits easy cleanout
- Interior LED hopper work light for easy night time operation
- Model 1319 features a standard weatherguard roll-over tarp to protect your harvested crop
- Optional on models 1119 and 1019
- Side mounted viewing ladder and front and rear shatterproof windows allow you to easily monitor tank contents
- Standard transport chain, D.O.T. approved flashing LED taillights, side marker lights, reflective markings and SMV emblem for safer road transport
Reliability Built In
- Model V1319 features a rigid axle with choice of high-flotation single wheels and tires, 36" traditional tracks or the 42" Equalizer track system
- Models 1119 and 1019 feature your choice of a rigid axle or adjustable axle with single wheels and tires, 36" auto-tension tracks, 36" traditional tracks or the 42" Equalizer track system
- Models 1019 is available with an adjustable axle and straddle dual wheels that can be widened from 120" to 154" centers
- All models feature a cast 2" single-tang hitch with a smooth chamfer opening and bushings that fit numerous hitch pin sizes which allows the cart to trail smoothly
- Single wheel and tire axles on model 1319 feature 12-bolt hubs with gusseted reinforcements and 6" special alloy, high-tensile spindles
- Single wheel and tire axles on models 1119 and 1019 feature 10-bolt hubs with gusseted reinforcements and 4 1/2" special alloy, high-tensile spindles
- Exclusively designed, heavy-duty 45° gearbox features a 1 3/4" output shaft for trouble-free operation
- Heavy-wall tubular steel main frame and axle, 12-gauge steel shell and 8-gauge steel underframe
- Heavy-duty side-wind jack is easy to operate for convenient tractor hookup
High-Flotation Singles
- Choose the right tire to fit your operation's needs with a wide variety of single tire size options depending on model:
- 1250/50x32 radial tires, 1050/50x32 radial tires, 900/60x32 or 900/65x32 radial tires.
42” Equalizer®Track System
- 42" wide track belt with 105” of ground contact length with the 4-bogie design on model 1319 and 87” of ground contact length with the 2-bogie design on model 1119
- Patented design features 8° of side-to-side camber and 20° of front-to-back pivot with independent movement of each track to provide uniform ground contact on uneven terrain.
- Exclusive rubber belt construction molds the tread, guide lugs and belt together as one piece, which increases durability and eliminates the need for glued on components.
- Cast, pivoting mid-rollers are on the same plane as the main end-wheels for optimum flotation and reduced stress on the belt.
- Shallow tread belt design provides greater flotation and traction.
- 40" main end-wheels feature 10-bolt hubs that are greaseable with triple-lip seals and a steel guard for optimum lubrication.
- Greaseable hubs ensure the operator can push out any dirt and debris from the hub, increasing life and eliminating down time.
- Hydraulic belt tensioning adjustment for easier track alignment, optimum ground contact and even weight distribution.
- Conveniently located PSI gauge allows the operator to easily check pressure, ensuring the proper tension is being applied to the belt.
- Standard auto-greaser system for automatic application at more frequent intervals for consistent lubrication.
Traditional Track System
- 36" wide track belt with 105” of ground contact length on the 4-bogie design available on models 1519, 1319 and 1119 and 87” of ground contact length on the 2-bogie design available on model 1119
- 40" main end-wheels feature 10-bolt hubs that are greaseable with triple-lip seals and a steel guard for optimum lubrication.
- Greaseable hubs ensure the operator can push out any dirt and debris from the hub, increasing life and eliminating down time.
- Hydraulic belt tensioning adjustment for easier track alignment, optimum ground contact and even weight distribution.
- Conveniently located PSI gauge allows the operator to easily check pressure, ensuring the proper tension is being applied to the belt.
- Cast, pivoting mid-rollers are on the same plane as the main end-wheels for optimum flotation and reduced stress on the belt.
- Exclusive rubber belt construction molds the tread, guide lugs and belt together as one piece, which increases durability and eliminates the need for glued on components.
Economical Track System
- Available on models 1119 and 1019 with a 36" wide rubber track belt that is molded as 1 piece for the greatest strength and durability
- 32" main end-wheels feature 8-bolt hubs for added durability
- Two cast, pivoting mid-rollers are on the same plane as the main end-wheels for optimum flotation and give the track 75" of ground contact length
- All end-wheels and mid-rollers feature hubs that are greaseable and triple-lip seals with a steel guard for optimum lubrication
- Hydraulic belt tensioning adjustment for easier track alignment, optimum ground contact and even weight distribution
Specifications
Model Number | 1319 | |
*Capacities measured with #2 corn at 15% moisture, 56# test weight. Due to continuing improvements in the design and manufacture of Unverferth products, all specifications contained herein are subject to change without notice. |
||
Capacity (bushels)* | 1330 | |
Minimum Tractor HP | 250 | |
Loaded Tongue Weight (lbs) | 6,295 | |
Empty Tongue Weight (lbs) | 3,525 | |
Auger Diameter | 21" into 20" | |
Unload Speed (bushels/min.) | 650 | |
Flighting Thickness | 7/16" | |
Hube Size/Spindle Diameter | 12-bolt/6" | |
Hydraulic Remotes Required | 4 | |
Front/Rear Slopes (degrees) | 32/30 | |
Hopper Length | 25' 4" | |
Hopper Width | 13' 8" | |
Auger Side Reach Max |
Measured to Inside Edge of Rubber Spout |
9' 9" |
Auger Side Reach Min | 8' 4" | |
Hitch to Spout when Straight Down (forward reach) | 1' 2" | |
Overall Transport Length | 31' 3" | |
Hitch to Center of Axle | 18' 6" | |
Single Wheels and Tires | ||
Measured Undercarriage | IF 1250/50x32 Tire | |
Empty Weight (lbs) | 19,050 | |
Hitch Height | 1' 8" | |
Hopper Height Low Side | 11' | |
Hopper Height High Side | 12' | |
Auger Height with Spout Straight Down | 12' 9" | |
Height to Top of Auger in Unload Position | 17' 6" | |
Width Outside of Tires | 15' 3" | |
Center of Tire to Center of Tire | 11' | |
Under Frame Height | 1' 4" | |
Tracks | ||
Measured Undercarriage | 42"x148" Equalizer Track | |
Empty Weight (lbs) | 30,300 | |
Hitch Height | 1' 10" | |
Hopper Height Low Side | 11' 1" | |
Hopper Height High Side | 12' 1" | |
Auger Height with Spout Straight Down | 12' 9" | |
Height to Top of Auger in Unload Position | 17' 8" | |
Width Outside of Tracks | 13' 11" | |
Center of Track to Center of Track | 10' 5" | |
Under Frame Height | 1' 3" | |
Loaded Tire Ground Pressure - P.S.I. calculated at the 3" penetration level. |
||
42"x148" Equalizer Tracks | 11.03 | |
42"x131" Equalizer Tracks | 11.50 | |
36"x148" Traditional Tracks | 12.87 | |
36"x131" Traditional Tracks | - | |
36"x112" Auto-Tension Tracks | - | |
520/85x42 R-1 Straddle Duals | - | |
480/80x46 R-1 Straddle Duals | - | |
IF 1250/50x32 R-1W (201A8 LI) | 19.88 | |
IF 1250/50x32 R-1W (188A8 LI) | - | |
1250/50x32 R-1W (188A8 LI) | - | |
1050/50x32 R-1W (178A8 LI) | - | |
900/70x32 R-1W (188A8 LI) | - | |
900/65x32 R-3 (193A8 LI) | - | |
900/60x32 R-1W (181A8 LI) | - |
Have A Question?
Contact us, we want to hear from you