shop parts

Genuine parts. Fast shipping.
Dependable performance.

Tillage & Disc Parts

Filters

Filters

WCP6000 - Ripper Point, Hiniker 6000 Cultivator
$18.00
SP16RH - Spider Cultivator Wheel, 15-1/2" OD, RH, 1-1/4" Square bore
$88.50
SP16LH - Spider Cultivator Wheel, 15-1/2" OD, LH, 1-1/4" Square bore
$88.50
P9691 - Trunion Mount
$14.85
P681129 - Plow Bolt with Hex Nut, flat head, 3/8"-16 x 1-1/4", grade 5
$0.89
P681015 - Coiled Spring Pin, 8mm X70mm
$1.49
P681007 - Shatter Plate Blade, Bigham Paratill
$32.85
P68100667 - Foot Piece, casting
$88.50
P681006 - Landslide, Bingham Paratil, hardened Alloy, 38-42 HRC
$20.85
P681005RH - Lower Shin, RH, hardened
$26.85
P681005LH - Lower Shin, LH, hardened
$26.85
P681004RH - Upper Shin, RH, hardened
$67.50
P681004LH - Upper Shin, Left hand, hardened
$67.50
P681003RH - Instep, RH, hardened
$5.85
P681003LH - Instep, LH, hardened
$5.85
P681002 - Ripper Point, (knock-on), hardened
$32.85
P652939 - Axle, 1-1/8" Square,SQ Head, Length 67.4"
$88.50
P6131800 - Nylock Nut, 1-1/8"
$4.35
P6101822 - Shear Bolt, 1-1/8" Diameter, 5-1/8" Length
$11.85
P5980 - Full spool,8-1/2" spacing
$58.50
P56021900 - Spike Tooth, 5/8" x 7/8" Diamond, 8-1/2" Length, with 1/2"
$4.35
P487168 - Axle, 1-1/8" Square,SQ Head, Length 94.6"
$133.50
P481844 - Axle, 1-1/8" Square,SQ Head, Length 85.5"
$118.50
P481611 - End Washer
$8.85
P481417 - Full Spool, 9" spacing
$35.85
P481416 - Full Spool,7-1/2" spacing
$34.35
P472593 - Half Spool,3"
$16.35
P472592 - Half Spool,1-5/8"
$13.35
P472591 - Half Spool, 4"
$19.35
P472586 - Axle, 1-1/8" Square, SQ Head,Length 71.9"
$97.50
P471015 - Axle, 1-1/8" Square,SQ Head, Length 57.6"
$82.50
P471014 - Axle, 1-1/8" Square, SQ Head, Length 49"
$66.00
P468607 - Axle, 1-1/8" Square, SQ head, Length 40.25"
$55.50
P468584 - Bumper Washer, 6", Convave
$28.35
P468583 - Axle, 1-1/8" Square,SQ Head, Length 79.4"
$100.50
P468582 - Axle, 1-1/8" Square,SQ head, Length 76.4"
$100.50
P4167 - End Washer
$6.75
P41207 - Wear Shin, Rawson Zone, Ductile, Heat Treated HRC 48-52
$58.50
P40827 - Axle,1-1/8" Square, round head,Length 104.75"
$148.50
P40826 - Axle, 1-1/8" Square, round head,Length 95.7"
$133.50
P404153LH - Scraper, LH
$2.85
P404152RH - Scraper, RH
$2.85
P38364 - Scraper Blade, 5" wide
$8.25
P3479 - U-Bolt, 3/4" thread, 7" Tool Bar, 9" overall length
$13.35
P3108 - Spool,4-1/8" depth
$31.35
P2816 - Half Spool, 2-3/8" Depth
$29.85
P260397 - Full Spool
$103.50
P25694 - Bumper washer
$10.35
P242189 - Extension Spring
$5.85
P241318 - Half Spool, 3-7/8"
$28.50
P241315 - Half Spool, 1-7/8"
$17.85
P241314 - Half Spool, 5-1/2"
$28.50
P241234 - Half Spool, 7"
$46.35
P241201 - LH Gang Standard
$103.50
P241200 - RH Gang Standard
$103.50
P241152 - Scraper Blade, 7" wide
$14.85
P240970 - Half Spool, 2-1/2"
$38.85
P240887 - LH Scraper Arm with 5/8" Wide Slot
$28.35
P240886 - RH Scraper Arm,with 5/8" wide slot
$28.35
P240518 - Full Spool
$88.50
P234484 - Solid Bushing
$4.95
P233669 - Split bushing
$4.49
P220089 - Hex Nut
$2.24
P20617 - Axle 1-1/8" Square, round head, Length 87"
$112.50
P20616 - Axle 1-1/8" Square, round head,Length 77.7"
$88.50
P20615 - Axle 1-1/8" Square, round head,Length 68.7"
$88.50
P20134 - Axle 1-1/8" Square, round head, Length 59.7"
$73.50
P20133 - Axle 1-1/8" Square, round head Length 50.7"
$73.50
P20132 - Axle 1-1/8" Square, round head, Length 41.75"
$58.50
P20006 - Scraper Blade, 5" wide, rectangle hole
$9.45
P183748 - Full Spool, 6mm Thickness, 7-1/4" Spacing
$54.00
P183629 - Full Spool, 6mm Thickness, 9" Spacing
$58.50
P16690 - Washer
$1.34
P139918 - Full Spool
$34.35
P129532 - Gang Standard
$88.50
P121120 - Right hand Scraper, Spring Steel
$14.85
P121119 - LH Scraper, Spring Steel
$14.85
P121118 - Scraper Blade
$7.35
P11064 - Snap Ring
$1.95
P101191 - 4" Spool
$17.85
P101190 - 3" Spool
$16.35
P101189 - 1-5/8" Spool
$13.35
58X78DH - Harrow Spike Tooth, 5/8"X7/8" Diamond,8" Length
$4.04
34X12SQH - Spike Tooth, 3/4" Square, 12" Length
$11.85
22X6.5W28S118 - Disc Blade, 22", 6.5mm thick, 28 concave waves
$163.50
22X6.5W28R2 - Disc Blade, 22", 6.5mm thick, 28 concave waves, saw-tooth
$163.50
20X6.5W20R134 - Disc Blade, 20" OD., 6.5mm thick, 20 waves, 1-3/4" Round
$88.50
20X6.5N10 - Notched Disc Blade, 20" X6.5MM, concave, double V edge
$88.50
118LW - Split Lock Washer
$1.49
60031 - Cotter Pin, 5/32" x 1-1/2"
$0.14
12437 - Grease Seal, Inside Diameter, 1.25", Outside Diameter
$1.43

No results found

No results match your search. Try removing a few filters.