Landoll 9630-32

Double tap to zoom

Share This Product:


  • Laser Cut, Robotically Welded Frame
  • 135” Frame Depth
  • 30” Minimum Between Shank Ranks
  • Self-Leveling Hitch
  • Cast Single Lip Hitch Cat. III or Cat. IV  (Model Dependent)
  • Outrigger Gauge Wheels on 28’ - 50’ Models
  • Shanks with 190 lbs. Point Load (Spring Clamp or Two Piece S-Tine)
  • 26 ½” Under Frame Clearance
  • 6” Shank Spacing
  • 8” Sweeps, 47 degree
  • Shanks Centered on Tires
  • Walking Tandems in All Locations
  • 11L x 15-12 Ply, 12.5L x 15-12 Ply, 12.5L x 15 Load Range F (Model Dependent)
  • Single Point Depth Control
  • Blue Powder Coat Paint
  • Safety Warning Lights


Model 9630-32
Approximate Weight - Spring Shanks N/A
Approximate Weight - S-Tine Shanks N/A
Working Widtd 32 ft. 6 in. (9.9 m)
Transport Widtd 17 ft. 4 in. (5.3 m)
Transport Height 13 ft. 10 in. (4.2 m)
Number of Shanks 65
Number of Shanks Per Section 19-27-19
Shank Type Spring Clamp Shanks or 2-Piece S-Tine Shanks
Shank Size 0.625 x 1.75 in. (15.9 x 44.5 mm)
Point Load 190 lbs. (86 kg)
Spring Shank Tower Laser Cut/Matchcut Components
Spring Size Extension Type 0.46875 in. (11.9 mm) Wire Diameter
Shank Spacing 6 in. (152 mm)
Special Shank Position Rear Shanks Centered on Tires
Sweeps 8 in. (203 mm) witd 47 Degree Mount
Under Frame Clearance 26.5 in. (673 mm)
Frame 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Frame Type Truss Type Witd Wrapped Shank Tube Joints
Transport Lift Axles 4.5 in. (114 m) Axle Witd Tower Lift System
Walking Tandems Standard Witd Hardened Connex Bushings
Tire Size - Main Frame (4) 12.5L x 15, Load F
Wheel Hubs - Main Frame 8-Bolt
Spindles - Main Frame 2.25 in. (57.2 mm) Slip-In Spindles
Tire Size - Wing Frame (4) 11L x 15-12 Ply
Wheel Hubs - Wing Frame 6-Bolt
Spindles - Wing Frame 2.25 in. (57.2 mm) Slip-In Spindles
Hitch Type Self-Leveling witd Manual Adjustment
Hitch Category Cat. III Single Lip witd 2.0 in. (50.8 mm) Hole
Machine Deptd Control Single Point, Front Mounted
Hydraulics 10 in. (254 mm) Stroke Cylinders
Outrigger Gauge Wheels Standard
Safety Warning Lights and SMV Emblem Standard
Safety Chain Kit Standard
Powder Coat Paint, Blue Sapphire Standard
Rear Hitch Witd Hydraulic Hoses Optional
Cat. V Single Lip Hitch Clevis (3 in. Hole) N/A
9 in. Sweeps Optional
8 in. Ultra Wing Sweeps Optional
9 in. Ultra Wing Sweeps Optional
Attachment Options:  
Flexible 5-Row Spike Harrow Optional
4-Row Coil Tine Harrow Optional
3-Row Spike and Reel Attachment Optional
3-Row Tine and Reel Attachment Optional
Horsepower Requirements 7 to 9 HP (5 to 7 kW) Per Foot

Have A Question?

Contact us, we want to hear from you