Kuhn FC 3561 TCD RA
Features
The Optidisc® Elite Cutterbar: A Clean and Consistent Cut
Lubed-For-Life Optidisc® Elite Cutterbar
The Optidisc® Elite cutterbar provides a flat, streamlined profile so that soil and crop residue do not accumulate and material flows smoothly, even in heavy, difficult crop conditions. These mowers come standard with the Fast-Fit® quick release knife system. Optidisc Elite cutterbars are designed and tested with a zero oil change interval. The highly-polished gears and synthetic gear oil ensure that this system does not require any regular internal maintenance, eliminating the need for cutterbar oil changes throughout the life of the machine.
Differential Disc Spacing
The innovative design of the Optidisc Elite cutterbar offers exclusive differential disc spacing.
- Less Distance for a Clean Cut - Narrower spacing at diverging discs provides greater knife overlap, which results in a clean cut, even when the grass is short or light.
- More Distance for Easy Crop Passage - Wider spacing at converging discs provides more space for the crop to pass. Cut crop is quickly carried away from the cutting area, greatly improving the cut quality.
High-Lift Discs and Fast-Fit® Kit
The cutting discs and end cones provide high crop lift, allowing cut materials to quickly leave the cutterbar and enter the conditioner, especially in thick crop conditions.
The Fast-Fit® quick-release knife system allows an operator to rapidly change out cutting knives with the use of a simple tool, yet still retain optimum cut quality and knife life. With Fast-Fit, an operator can achieve up to 50% time savings over a standard system.
Protectadrive® Disc Bearing Stations
- Protectadrive® Safety: Every minute saved during the hay season is precious. Ultimate protection, from the externally removable Protectadrive disc bearing stations, provides maximum reliability and quick service. In the event of an impact between a disc and an obstacle, the shaft holding the disc can shear just above the bearing. This is thanks to its carefully dimensioned shear groove. As a result, the gear teeth are protected.
- Extra Rigidity Where it Counts: Disc bearing stations are attached by bolts that pass through the entire cutterbar. This is an exceptionally strong and secure attachment with no risk of mount being torn out of the cutterbar in case of shocks. The disc drive pinion is held precisely in place, all resulting in excellent reliability and reduced maintenance costs.
- Gear-to-Gear Power Transmission: Gear-to-gear power transmission, a staple of all KUHN disc mowers, allows for maximum power to be transferred through all gears in the cutterbar. Unlike other gear cutterbars, equal sized gears throughout reduces torque on the gear teeth and leads to unsurpassed reliability and longevity.
Adapt to a Variety of Conditions
Torsion Bar Suspension System
The torsion bar suspension system provides exceptional flotation to precisely follow ground contours. The torsional resistance can be easily fine-tuned to match the header ground pressure to different field conditions and operating speeds. A built-in slotted linkage eliminates the need to run the hydraulics in the float position.
Adjustable Forming Shields
The adjustable forming shields allow the windrow width to be varied to match different harvest practices and weather conditions. Indicators allow you to precisely match the setting on both sides. When not in use the shields are easily removed and placed in the storage position on the tongue.
Rear Hood Adjustment
The rear hood can be set either for windrow formation or flipped over to engage fins for wide spreading. The hood can be angled up and down in the windrow position to form neater windrows. It can be easily flipped to the opposite side on wide spreading models. Both sides have tilt adjustability to either stand crop up for windier conditions or lay crop flat for sunnier conditions. Widespread fins standard on finger conditioner models and optional on roller models.
Gyrodine® Swivel Hitch
The heavy-duty Gyrodine® gearbox is designed to withstand the most severe pull-through force from the hitch to the machine. The swivel design allows turns in excess of 90° while keeping the PTO driveline straight. This design allows extremely tight turns for clean, square corners while minimizing PTO vibration and wear. The swivel hitch is available in either a drawbar or two-point hitch configuration.
Uniform Crop Conditioning
Windrow Mergers
The merger on the mower offers the operator more diversity in windrow placement. The wide merger conveyor allows the crop to be easily and gently transferred into the windrow. The merger conveyor belt can be angled and has individual conveyor lift abilities. No tools are needed for belt tensioning adjustments and the merger can be dismounted from the mower.
DigiDry® Finger Conditioner
The DigiDry® finger conditioner provides consistent drying of grass and legume crops in various conditions with little maintenance. Wide rotor, fingerstyle conditioning increase crop-on-crop rubbing to create openings in the waxy cuticle layer helping the stems dry at the same rate as the leaves. The built-in breakback feature protects against damage from rocks and other foreign materials.
Specifications
SPECIFICATIONS | FC 3561 TCD RA |
Working width | 11' 6" (3.5m) |
Overlap with a front mower | 9' 10" (3 m) |
Transport width | 11'8" (3.6 m) |
Cutterbar | Optidisc® Elite |
Number of discs | 8 |
Blade retention system | Fast-Fit |
Cutting height | 1.4" - 2.6" (35 to 65 mm) optional raised skids available |
Removable Protectadrive® disc bearing stations | Standard |
Conditioning system | DigiDry® steel finger |
Conditioning speed | 780 or 1,000 rpm |
Disc rotational speed | 2,900 rpm |
Conditioner width | 113" (2.9 m) |
Windrow width | 3'7" - 8'10" (1.1 - 2.7 m) |
Suspension - travel | +10'' to -5.75'' (+25.4 to -14.6 cm) |
Wide spreading system | Standard |
Wide spread - max | 10'4" (3.2 m) |
Conveyor belt drive | Self contained hydraulic system |
Forage delivered by conveyor belt | Choice of 2 swaths side by side or on top of the windrow for the first pass (or from a front mower if used as a combination) |
Merger operation and function control | Belt speed, direction and lift from control box |
Hitch | Trailed, Cat. 2 or 3N, quick-hitch compatible |
Tires | 400/60x15.5 |
PTO speed | 1,000 rpm |
Minimum PTO power requirement | 67 hp / 91 kW |
Required tractor hydraulic connections | 1 SA + 1 DA |
Required tractor electrical connections | 7-pin plug |
Road lights and signaling | Standard |
Machine weight approx. | 6,724 lb (3,050 kg) |
Have A Question?
Contact us, we want to hear from you