Kuhn 4830-530R

Kuhn 4830-530R for sale at Colerain, North Carolina

Double tap to zoom

Kuhn 4830-530R for sale at Colerain, North Carolina

 

Features

3-Point Hitch

Designed for deep tillage with strength and durability in mind. This Category III, 3-point hitch is integrated into a two-bar frame design with main members of heavy-duty, 6”x6” structural steel tubing.

Drawbar Pull-Hitch (Small Frame)

The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4830 in-line ripper. Equipped with four 280/70 R 15 tires, the drawbar hitch provides excellent field flotation and depth control.

Drawbar Pull-Hitch (Large Frame)

The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4830 in-line ripper. Four 280/70 R15 tires rear and (2) 280/70 R15 tires on front mounted gauge wheels.

Shear-Bolt

Rigid, shear-bolt mounts are an economical choice for soils where rocks or other obstacles are not a concern.  Shear-bolt protection guards against shank damage from unexpected obstacles.

  • Shear force: 10,000 pounds (approximate)
  • 16” maximum shank working depth
  • For non-rock conditions

 

Spring Reset

Recommended for field conditions where obstacles or rocks may be encountered. A 4”x4” welded tube provides strength.

  •  2,500 pound point load
  •  20” trip height
  •  16” maximum shank working depth
  •  36” underframe clearance

 

PathFind’R™

Exclusive pivoting design allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement.

  •  Basic spring reset design
  •  Makes deep ripping possible on contours or terraces
  •  Deflects impacts improving performance in rocky soils
  •  Smoother steering under full power with tracked tractors
  •  Reduces stress on implement frame and 3-point tractor hitch
  •  Not compatible with pull-type hitch
  •  20” trip height
  •  16” maximum shank working depth
  •  36” underframe clearance

 

MRD Shanks, Points and Wings (Minimum Residue Disturbance)

Choose from a variety of MRD shank points and wings to achieve optimum residue level and surface appearance.

  •  1-1/4” Profile
  •  Austempered ductile, reversible wear bar
  •  Welded chromium carbide side plates

 

2” Chromium Carbide Point

5” Shattering Wing

  •  Residue remaining: 51% to 65%
  •  Fracture: 36% to 52%

Low-Disturbance Shank Cap

  •  Residue remaining: 51% to 65%
  •  Fracture: 31% to 48%

 

¾” Chromium Carbide Point

5” Shattering Wing

  •  Residue remaining: 68% to 75%
  •  Fracture: 36% to 52%

 

 Low-Disturbance Shank Cap

  •  Residue remaining: 68% to 75%
  •  Fracture: 31% to 48%

 

No-Till Shank, Points and Wings

The no-till point and 8” wing break up the compacted soil layer, while the narrow ¾” shank slips through the soil leaving up to 86% residue on the surface. With replaceable wear parts, this no-till design offers up to 50% operation cost saving versus competitors.

  •  ¾” profile
  •  High-tensile steel shank
  •  Austempered or chromium carbide points, wings and wear bar
  •  Chromium carbide side plates
  •  Residue remaining: Up to 86%
  •  Fracture: 55% to 70%
  •  Replaceable wear parts

 

2” Hard Surface Point

  •  Best performance for rocky conditions
  •  Residue remaining: 51% to 65%
  •  Fracture: 31% to 48%

Specifications

SPECIFICATIONS 4830-530R
Transport Width (ft/m) 11'1" / 3.4
Frame Type 6" x 6" Double Rank Toolbar
Number of Shanks 5
Shank Spacing (in/cm) 30" / 76
Working Width (ft/m) 12'6" / 3.8
Spring Reset Shank Approximate Weight (lb /kg) 3,660 / 1 660
Shear Bolt Shank Approximate Weight (lb/kg) 2,660 / 1 206
STANDARD EQUIPMENT  
Hitch Type CAT III 3-Point with Parking Stand
Coulter Blades 22" 1/4" Smooth Coulter Blades, 450 lb (250 kg) Down Pressure
Shank Mount Spring Reset: 2500 lb Point Load, 20" Trip Height
Shanks No-Till Shank, 3/4" Thick (Very Low Surface Disturbance), Profile Wear Bar Austempered Ductile, Non-Reversible, Chromium Carbide Shank Side Protectors
Points 1-¾" Austempered Ductile Points, 8" Austempered Shattering Wings
Shattering Wing 5" Chromium Carbide Shatter Wings (MRD Shanks Only)
Depth Control Ratchet Jack Adjustable Gauge Wheels
Gauge Wheels (2) 20.5" x 8", Load Range E
Transport Locks and Safety Slow Moving Vehicle Sign, High Visibility LED Transport Light Kit
OPTIONAL EQUIPMENT  
Hitch Type Drawbar Pull Hitch Front Lift, Includes (4) 280/70 R15" Tires, Duals, (1) 4-1/4" x 10" and (1) 4" x 10" Cylinder, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (Less Parking Stands)
Shank Mount Rigid: Shear-Bolt Protected, 10,000 lb (Shear Force)
Shank Mount Pivoting Pathfind'r™ Spring Reset, 2500 lb
Shanks MRD Shank, 1-1/4" Thick (Minimum Residue Disturbance), Reversible Austempered Ductile Wear Bar, Chromium Carbide Shank Side ProtectorsS
Shanks HD No-Till Shank, 1" Thick (Low Surface Disturbance), Narrow Profile Wear Bar Austempered Ductile, Non-Reversible.Chromium Carbide Shank Side Protectors
Points 2" Chromium Carbide Points (Non-Rock areas)
Points 2" Welded Points (MRD Shanks Only)

(Recommended for Rocky Areas)
Points ¾" Chromium Carbide Points (MRD Shanks Only)
Shank Cap Low Disturbance Shank Cap (In Lieu of Wing)
Wing Gauge Wheels Not Applicable
Closing Wheels (2) 4 x 16" Smooth Closing Wheels per Shank, Adjustable Spring Tension (Limit Shank Soil Blowout)
Shank Stagger Kit 6" Offset Between Shanks
OPERATION INFORMATION  
Recommended Operating Speed (mph/km/h) 4 - 7 / 6 - 11
Recommended Working Depth 8" - 16" / 20 - 41 cm
Recommended Tractor Power Range (PTO hp/kW) 30 - 40 PTO hp per Shank / 22- 30 kW

Have A Question?

Contact us, we want to hear from you