Double tap to zoom
EXCLUSIVE 5-STEP PROCESS
Exclusive 5-Step Process
- Capture and Slice
Excalibur® VT (Vertical Tillage) blades, with their distinctive scalloped edge, capture and slice residue into planter-manageable sizes. This exclusive, 32-flute design easily penetrates soil, creates small clod size and begins the soil and residue mixing process. 7 inch blade spacing on front gang enhances optimal soil displacement.
- Control and Distribute
Adjustable mid-mounted tines on 7 inch spacing drive soil and residue to ensure consistent flow of material. During this process, additional clod size reduction takes place, as well as improved residue distribution across the width of the operation, resulting in more consistent soil and residue conditions.
- Cut and Remove
In this high-speed process, adjustable gang angles with Excalibur VT blades (on 8” spacing), remove the maximum amount of uncut soil at shallow depth settings, while minimizing furrowing and ridging for a smooth field finish. The adjustable gang angle gives you the choice to move soil laterally or to leave more residue.
- Mix and Anchor
Exclusive to KUHN Krause, rotary Star Wheel™ treaders aggressively mix soil and residue, pulverize large clods, remove soil from disturbed root balls and anchor residue into the soil surface.
- Size and Firm
The proven 24/7® soil conditioning reel delivers clod sizing and firming for this high-speed operation.
Adjustable Gang Angles
True vertical tillage is maintained with the 1° to 5° gang angle, while the XTended 6° to 8° gang angle offers more aggressive tillage action. Optional on-the-go hydraulic adjustment allows the operator to adjust front and rear gangs on the same angle or independently, varying front to rear angles to match a variety of agronomic goals. These shallow angles prevent soil roll and inversion, distinguishing the Excelerator’s performance from competitive units based on older disc harrow technology with typical gang angles from 10° to 22°.
Excalibur® VT Blade Spacing
Proven 22", 32-flute Excalibur® VT blades cut residue and maintain a sharp edge over time. The Excalibur blades are configured in a combination spacing with 7" front spacing to enhance optimal soil displacement, while 8"rear spacing maintains performance in adverse conditions. The unique design of the Excalibur VT blades minimizes furrowing and ridging, leaving a smooth field pass-to-pass.
Adjustable mid-mounted tines on 7-inch spacing drive soil and residue to the ground to ensure consistent flow of material. During this process, additional clod size reduction takes place, as well as improved residue distribution across the width of the machine, resulting in more consistent soil and residue conditions.
Exclusive Star Wheel™ Treaders
Aggressively mix soil and residue, pulverize large clods, level and anchor residue into the soil surface. This action protects residue from blowing winds or washing rains, and begins the decomposition of residue into valuable organic matter.
The Star Wheel treaders assist in breaking out any remaining uncut soil between blade paths providing a smooth, even surface for planter row units to place seeds consistently in the seed zone. Constant flow hydraulic-adjustable gangs are spring cushioned to contour over varying field conditions, evenly distributing residue across the soil surface for a uniform finish.
Heavy-Duty 24/7® Conditioning Reel
The proven 24/7 soil conditioning reel delivers clod sizing and firming for this high-speed operation. The 24/7 reel also offers the convenience of “floating” with a simple in-field adjustment, allowing continued operation in higher soil moisture conditions. Two heavy-duty reel options are available. Choose flat blades for maximum clod sizing in hard soil conditions or round bars for increased soil firming in loamy soil conditions, this effective component completes a superior finish to any field.
|Transport Height (ft/m)||14'9" / 4.54|
|Transport Width (ft/m)||18'0" / 5.49|
|Blade Spacing (in/cm)||Combination 7" Front 8" Rear / 17.8F 20.3R|
|Number of Blades||110|
|Working Width (ft/m)||33'6" / 10.24|
|Gang Angle||Adjustable 1 to 8 Degrees|
|Approximate Weight (lbs/kg)||30,859 / 13 997|
|Hitch Type||Articulating Ball, CAT IV- 2" Pin|
|Tongue Type||Mechanical Fore / Aft Adjustment, Level - Lift Tongue|
|Hydraulics||Single Point Depth Control, Cylinders, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses|
|Transport Locks and Safety||Hydraulic Lock Valves (Lift and Wing Fold), Slow Moving Sign, High Visibility LED Lighting|
|Excalibur® Blades||Excalibur® VT Blades - 22" Diameter, 6 mm, 32 Flute, Reversed Crimped Center|
|Gangs||1-3/4" Round Diameter Alloy Tie Rod, Rock-Flex® Bearing Arms - C-Type 1-1/4" x 2-1/2", 6" Bell Diameter Ductile Iron Spools, Cast Housing PEER® TILLXTREME™ No Daily Grease Maintenance Bearings, Trash Bars, Tie Rod Wrench|
|Gang Angle Adjustment||Mechanical Adjustment 1 to 8 Degrees|
|Main Frame Tires||Walking Beams With Spherical Pivot Bearings, Slip-In Spindles, 8 Bolt Heavy-Duty Hubs, Four 440 x 55R x 18|
|Wing Frame Tires||Walking Beams With Spherical Pivot Bearings, Slip-in Spindles, 8 Bolt Heavy-Duty Hubs, Two 340/60R x 16.5 per Wing (2)|
|Wing Fold Cylinders||Four 4" x 40" Adjustable Constant-Flow Hydraulic Down Pressure|
|Lift Cylinders||Center: (2) 4 -1/4" x 10"
Wings: (2) 4" x 10"
|Star Wheel™ Treader Gang||1-1/2" Round Diameter Alloy Tie Rod, Rigid Bearing Arms, 8" Spacing, 6 Degree Angle, Manual Spring Adjustable Gangs, Flangette PEER® TILLXTREME™ No Daily Grease Maintenance Bearings|
|24/7® Conditioning Reel||Flat Bar Spiral Rod HD Reels,
No Daily Grease
|Hitch Type||Articulating Ball, CAT V - 2 3/4"" Pin|
|Tongue Type||Guardian Hitch™ (Cushion Tongue) Level-Lift|
|Gang Angle Adjustment||Hydraulic Adjustment 1 to 8 Degrees|
|Gauge Wheels||Two Front Castering 20.5" x 8 Load Range E|
|Gauge Wheels||Two Front Castering 20.5" x 8 Kevlar|
|Star Wheel™ Treaders||1-1/2" Round Diameter Alloy Tie Rod, Rigid Bearing Arms, 8" Spacing, 6 Degree Angle, Manual Spring Adjustable Gangs, Flangette PEER® TILLXTREME™ No Daily Grease Maintenance Bearings|
|24/7® Conditioning Reel||Round Bar Spiral HD Reels, No Daily Grease Maintenance Bearings|
|Rear Hitch||Extendable Tongue Rear Hitch: Max. 3,750 lb Tongue Weight and 15,000 lb Tow Weight with Hydraulic Remotes and Lighting Receptacle WITH & WITHOUT ATTACHMENT|
|Recommended Speed of Operation||8-10 mph / 12-16 km/h
(Rocky Conditions: 6-8 mph / 9-13 km/h)
|Maximum Working Depth||3.5" / 8.9 cm|
|Recommended Tractor Power Range (mph/kw/h)||9-13 PTO Horsepower / 22.01-31.80 kw/m|
Have A Question?
Contact us, we want to hear from you